| DC Motor Controllers |
 |
 |
|
- Integrated Linear Power Amplifiers and PWM
Outputs
- Simultaneous Control of up to 4 DC
Servo-Motors
- Powerful Macro Command Language
- Programmable Torque Limit
- Fast 32-bit Digital PID V-ff Servo Loop
- 16 I/O Lines for Flexible Automation
- Electronic Gearing
- Motor-Brake Control Output
- Extensive Software Support
- RS-232 and Optional IEEE-488.2 Interfaces
- General Command Set (GCS)
Compatible
|
|
 Back to Top
Product Description | Specs / Drawings | Ordering Info | PDF
|
|
|
|
 |
|
- Two and Four Axis Versions
- Very Cost-Effective: Servo Amplifiers
On-Board
- Additional PWM Outputs for High-Power Motors
- Trapezoidal Curve, S-Curve and Velocity
Contouring
- 64 k Samples RAM for High- Speed Trace
Operations
- Hardware Interrupts for Process Control
- 16 I/O Lines for Flexible Automation
- Electronic Gearing
- Motor-Brake Control Output
- Extensive Software Support
- General Command Set (GCS)
Compatible
|
|
Product Description | Specs / Drawings | Ordering Info | PDF
|
|
|
 |
|
- High Performance at Low Cost
- DC Servo-Motor Controller Supplies up to 30 W
- 20 MHz Encoder Input for High Speed & Resolution
- Macro Programmable Stand-Alone Functionality
- Network Capability for Multi-Axis Applications
- Non-Volatile EEPROM for Macros and Parameters
- Digital I/O Lines (TTL)
- Motor-Brake Control
- USB and RS-232 Interface
- Optional Joystick for Manual Control
- Works with All PI Micropositioners
|
|
Product Description | Specs / Drawings | Ordering Info | PDF
|
|
|
 |
|
- Compatible with National Instruments
Controllers
- Integrated Analog and PWM Amplifiers for 4
Channels
- Plug & Play Operation
- Uses Standard 68 Pin NI Connection Cable
- 37 - Pin Interface for Auxiliary and I/O
Lines
|
|
Back to Top
Product Description | Specs / Drawings | Ordering Info | PDF
|
|
|
 |
|
- Seamless Control of up to 18 Axes with Piezo
Actuators, Servo-Motors, Voice Coil Drives
- Integrated High-Level Command Set Performs
Scans, Alignments, etc.
- Plug-and-Play Configuration
- Integrated Amplifiers
- Large Variety of Accessories : I/O Cards,
Photometers, Manual Control Pad
- Optional IEEE 488 Interface
- Software Libraries and High-Level Drivers
- Powerful Macro Command
Language
|
|
Product Description |
|
|
|
| Piezo Motor Controllers |
|
 |
|
- Optimized for PILine® Ultrasonic Piezo Linear Motors
- High-Bandwidth Encoder Inputs Allow High Speed and Resolution
- PID Servo-Control with Dynamic Parameter Switching
- Integrated Piezo Motor Power Driver
- USB, RS-232 and Analog Interfaces (e.g. for Joystick)
- 4 + 4 Programmable TTL-I/Os for Flexible Automation
- Data Recorder
- Daisy-Chain Networking for up to 16 Axes
- Powerful Macro Programming Language, e.g. for Stand-Alone Operation
- Extensive Software Support, LabVIEW, DLL ...
|
|
Product Description | Specs / Drawings | Ordering Info | PDF
|
|
|
 |
|
- Drives 2 PILine® Open-Loop Piezo Linear
Motor Stages
- Integrated Programmable Motion Sequencer and
Ultrasonic Driver for 2 Axes (No External Driver
Required)
- Single 12 VDC Operation
- Stand-Alone Functionality
- Analog Joystick Option
- Network Option for Multi-Axis Applications
- Flash Memory for Motion Sequences and
Parameters
- 8 Programmable TTL Input/Output Lines
- 4 Analog Inputs
|
|
Back to Top
Product Description | Specs / Drawings | Ordering Info | PDF
|
|
|
 |
|
- For PILine® Ultrasonic OEM Motors and Stages
- Pulsed or Analog Drive
- OEM Board or Interface Box
- Ideal also with Third Party
Controllers
|
|
Product Description | Specs / Drawings | Ordering Info | PDF
|
|
|
| Hybrid Controller |
|
 |
|
- Two channels
- 10kHz Sampling Rate
- 24-Bit Piezo Motion Resolution (<1 picometer)
- High-Resolution Incremental Sensor with Serial Interface
- Real-Time Operating System
- Interfaces: VGA, Keyboard, Mouse, RS-232, TCP/IP Ethernet
|
|
Product Description | Specs / Drawings | Ordering Info | PDF
|
|
|
| NEXLINE® PiezoWalk® Controller |
|
 |
|
- Special Control Algorithms for NEXLINE® Nanopositioning Linear Drives
- 32-Bit Digital Filters
- 24-Bit DAC Resolution
- Fully Programmable Low-Pass and Notch Filters
- Non-Volatile User Settings and Last-Position Data
- PI General Command Set Compatible
|
|
Back to Top
Product Description | Specs / Drawings | Ordering Info | PDF
|
|
|
| Motion Controllers for Stepper Motors |
|
|
|
|
- High Performance at Low Cost
- Network Capability for Multi-Axis Applications
- Compatible and Networkable with C-863 Mercury™ DC-Motor Controllers
- Joystick Port for Manual Control
- Non-Volatile Macro Memory
- Parameters Changeable On-the-Fly
|
|
Product Description | Specs / Drawings | Ordering Info | PDF
|
|
|
 |
|
- 4-Axis Stepper-Motor Controller / Driver for
Complex, High-Precision Motion Control
- 20,000 Steps / Rev. Microstepping for
Ultra-Smooth, High-Resolution Positioning
- Precision Circular / Linear Interpolation
and Continuous Path Contouring for Complex
Motion Profiling
- RS-232 Interface for Universal Connectivity
- Powerful Motion BASIC™ Programming Language
for Online / Offline Programming
- Front Panel Keypad and LCD Display for
User-Friendly Operation
- Non-Volatile Flash ROM for up to 8000 Lines
of Motion BASIC™ User Program Code
|
|
Product Description | Specs / Drawings | Ordering Info | PDF
|
|
|
 |
|
|
|
| Back to Top |
|
|
|
