Bookmark this site
Deutsch

Catalog Downloads
Technotes
PI Seminars
Manuals / Software

Download a PDF copy of PI Newsletter #40
Visit PI's New Online Store
See PI's New Informative Software Webpage
Miniature Piezo Motor / Slide for High Volume Applications
High-Dynamics Fast Steering Mirror Platforms Provide Larger Deflection-Angles
New High-Performance Piezo Actuators and High-Voltage Amplifiers
DuraAct™ Piezocomposite Patch Transducers for Adaptronics and Smart Structures
NEXACT®: Novel Compact OEM Piezo Stepping Motor / Actuator with Long Travel Range
Open-Frame XY Piezo-Motor Stage with Linear Encoders
Miniature Linear Translation Stage
Piezo Driver / Nanopositioning Controller /
High-Voltage Amplifier Overview

High-Speed Digital
Piezo Controllers 		3-Channel
Nanocube Controllers		 High-Power Piezo Drivers, 550 W-2000 W Controllers for Bender
Piezo Actuators		 OEM Piezo Controller
Modules






Modular Piezo Controllers Single Channel Con-
trollers / Amps / Cards		 Open-Loop Low-/High- Voltage Piezo Drivers Accessories Piezo Controller Board






Compact Driver Modules Piezo Linear Motors/Stages Piezo
Actuators		 Piezo Nanopositioning Stages Piezo Tip/Tilt Mirrors





 

PI offers the largest selection of digital and analog piezo controllers, drivers and high-voltage amplifiers for piezoelectric actuation systems worldwide. Advantages: digital and analog controllers; 100 V and 1000 V amplifiers; modular, OEM and PC-plug-in designs; ultra-low-noise, high-stability servo-controllers; 1 W to 2000 W peak power; energy-recovery designs.

More Information...

Selection Guides
Introduction, Applications
Reasons for Choosing PI
Test and Quality Control
 

High-Speed Digital Piezo Controllers

Product Image - E-709

E-709 Digital Controler


  • Fast Digital Controller, Software Configurable Servo Parameters
  • Improves Linearity of SGS and Piezoresistive Sensors to 0.02%
  • Digital Interfaces: USB, RS-232
  • Comprehensive I/O Functions
  • Additional High-Bandwidth Analog Control
  • Input / Sensor Input
  • Low-Cost OEM Versions Available
  • Comprehensive Software Package

Back to Top E-709 Technotes | PDF Datasheet

Product Image - E-761 PCI Bus

E-761 3-Channel Digital Piezo Nanopositioning Controller in PCI-Board Format


  • For Closed-Loop Piezoelectric Nanopositioning Systems with Capacitive Sensors
  • High-Speed PCI Interface
  • Additional High-Bandwidth Analog Interface
  • 32-Bit Digital Filters
  • 24-Bit DAC Resolution
  • 2 Linearization Systems
  • Coordinate Transformation for Parallel Kinematics / Parallel Metrology Systems
  • ID-Chip Support for Automatic Calibration
  • Integrated Linear Amplifiers
  • Extensive Software Package
Back to Top Product Description | Specs / Drawings | Ordering Info | PDF

Product Image - High-Speed Digital Piezo NanoAutomation Controller

E-753 Digital High-Speed Piezo Controller for Single-Channel Nanopositioning Systems


  • Next Generation Digital Controller Provides Higher Flexibility, Accuracy and Speed
  • 100 kHz Sensor Sampling; 32-bit Floating Point DSP; 24-bit Low-Noise D/A Converters
  • Ethernet (TCP/IP) Interface for Remote Control Capability, RS-232
  • Automatic Calibration Data Coaching from Stage ID-Chip
  • Additional High-Bandwidth Analog Control Input / Sensor Input
  • Digital I/O Lines for Triggering Tasks
  • Extensive Software Support
  • For Nanopositioning Systems with Capacitive Sensors
Product Description | Specs / Drawings | Ordering Info | PDF
Product Image - Multi-Channel Digital Piezo Controllers with Dynamic Linearization

E-710 Multi-Channel Digital Piezo Controllers with Dynamic Linearization


  • For Piezo Nanopositioners with Capacitive Feedback Sensors
  • 3-, 4- & 6-Channel Versions
  • 32-Bit Digital Filters
  • Hardware and Firmware Linearization
  • Coordinate Transformation for Parallel Kinematics / Parallel Metrology Systems
  • Optional Dynamic Digital Linearization (Firmware Option) Improves Scanning Linearity
  • ID Chip Support for Automatic Calibration
  • Optional High-Speed Parallel I/O or DSP Interface
  • Optional Analog Input
  • Integrated Linear Amplifiers
  • GCS (General Command Set) Compatible
Product Description | Specs / Drawings | Ordering Info | PDF
Product Image - NanoCapture<SUP>™</SUP> Software for E-710 Digital Piezo Controller

E-710 NanoCapture™ Software for E-710 Digital Piezo Controller


  • Facilitates Optimization of all Servo Parameters
  • Measures System Response and Resonant Frequency, Creates Bode Plots
  • Wave Generator for Programming Simple and Complex Motions
Back to Top Product Description | PDF
Product Image - Modular Digital Piezo Controller System, up to 6 Axes

E-712 Modular Digital Piezo Controller System, up to 6 Axes


  • Digital Controller of the Newest Generation: 600 MHz Processor; up to 50 kHz Sensor Update Rate;
  • Highly Stable 20-bit D/A Converters
  • Real-Time Operating System for Excellent Trajectory Control
  • Modular Design for Greatest Flexibility in Meeting Custom Requirements
  • Auto-Calibrating from Stage ID-Chip for Interchangeability of Controller and Mechanics w/o Recalibration
  • Flexible Interfacing: USB, RS-232 & Ethernet
  • Optional High-Bandwidth Analog Inputs and Outputs
Product Description | Specs / Drawings | Ordering Info | PDF
Product Image - High-Speed NanoAutomation Piezo Controllers

E-612 High-Speed NanoAutomation® Piezo Controllers


  • 10 microsecond Parallel Command Port
  • OEM Modules and Bench-Top Versions
  • Controls Low-Voltage Piezo NanoPositioners with Capacitive Sensors
  • Opto-Isolation for EMI Immunity
  • Integrated PZT Power Amplifier
Product Description | Specs / Drawings | Ordering Info | PDF

3-Channel Nanocube Controllers

Product Image - NanoCube Piezo Controller

E-664 NanoCube® Piezo Controller


  • 3 x 14 W Peak Power
  • Position Servo-Control
  • For P-611 NanoCube® NanoPositioning Systems
Product Description | Specs / Drawings | Ordering Info | PDF
NanoCube Piezo Controller Card for F-206 / C-880 Controller

E-760 NanoCube® Piezo Controller Card for F-206 / C-880 Controller


  • Specially Designed for P-611 NanoCube®and F-206 HexAlign™ 6D Alignment System
  • Built-in Optical Metrology for Automatic Alignment
  • Integrated Linear Amplifiers with 3 x 9 W Peak Power
  • Position Servo-Control
Back to Top Product Description | Specs / Drawings | Ordering Info | PDF

High-Power Amplifiers 500 to 2000 W

Product Image - High-Power HVPZT Piezo Amplifier / Controller with Energy Recovery

E-481 High-Power High-Voltage Piezo Driver / Controller with Energy Recovery


  • High-Voltage Amplifier with 2000 W Peak Power
  • Energy Recovery
  • Output Voltage 0 to ±1000 V and bipolar
  • Optional Position Servo-Controller Module
  • Optional Computer Interface and Display Module
  • Differential Output
Product Description | Specs / Drawings | Ordering Info | PDF
Product Image - High-Power, Modular HVPZT Piezo Drivers / Controllers

E-471 High-Power, Modular HVPZT (1000 V) Piezo Drivers / Controllers


  • Integrated Linear High-Voltage Amplifier w/ 550 W Peak Power
  • Output Voltage -3 to -1100 V & Bipolar
  • 1- and 2-Channel Versions
  • Optional Position Servo-Control Modules
  • Optional RS-232 & IEEE 488 Interface Module & Display
Product Description | Specs / Drawings | Ordering Info | PDF

Controllers for Bender Piezo Actuators

Product Image - Piezo Controller for Closed-Loop Low-Voltage Piezo Multilayer Bender Actuators

E-651 Piezo Controller for Closed-Loop Low-Voltage Piezo (60 V) Multilayer Bender Actuators


  • Controller for Closed-Loop Multilayer Bimorph Actuators
  • 1- and 2-Channel Versions
  • Integrated Linear Amplifiers
  • Bench-Top & OEM-Board Versions
Back to Top Product Description | Specs / Drawings | Ordering Info | PDF
Product Image - Piezo Drivers for Low-Voltage Piezo Multilayer Bender Actuators

E-650 Piezo Drivers for Low-Voltage Piezo (60 V) Multilayer Bender Actuators


  • Specifically Designed to Drive Multilayer Bimorph Actuators
  • Bench-Top and OEM Versions
  • Integrated Linear Amplifier w/ up to 18 W Peak Power
  • LCD Voltage Display
  • Output Voltage ±30 V or 0 to 60 V and Separate Fixed Voltage

Product Description | Specs / Drawings | Ordering Info | PDF

OEM Controller Modules

Product Image - Low-Voltage Piezo Piezo Driver & Position Servo-Controller Modules, OEM Version

E-413 Compact Piezo Amplifier for DuraAct™ Patch Transducers and PICA™ Shear Piezo Actuators


  • Peak Power to 50 W
  • OEM Module / Bench-Top for PICA™ Shear Actuators
  • OEM Module for DuraAct™ Piezoelectric Patch Transducers

Product Description | Specs / Drawings | Ordering Info | PDF
Product Image - Low-Voltage Piezo Piezo Driver & Position Servo-Controller Modules, OEM Version

E-610 LVPZT (100 V) Piezo Linear Amplifier & Position Servo-Controller Modules, OEM Version


  • Open-Loop and Closed-Loop Versions
  • For Capacitive, Strain Gauge and LVDT Sensors
  • Integrated Linear Amplifier w/ 14 W Peak Power
  • Runs on Single Stabilized Voltage (12 to 30 VDC)
Product Description | Specs / Drawings | Ordering Info | PDF
Product Image - Low-Voltage Piezo Piezo Driver & Servo-Controller Module with High-Speed RS-232 Interface

     

E-621 LVPZT (100 V) Piezo Amplifier & Servo-Controller Module with
   High-Speed RS-232 Interface


  • Integrated 20-Bit High-Speed RS-232 Interface
  • Integrated Linear Amplifier
  • Network Capability with up to 12 Channels
  • For Capacitive, LVDT and Strain Gauge Position Sensors
  • GCS (General Command Set) Compatible
Back to Top Product Description | Specs / Drawings | Ordering Info | PDF
Product Image - OEM Piezo Driver and Power Supply Modules

E-831 OEM Piezo Driver and Power Supply Modules


  • Cost Effective Piezo Driver
  • Small Size
  • Low Noise, High Stability
  • Easy-to-Use
  • Full Overcurrent, Short-Circuit and Temperature Protection
  • Power-up/down Without Voltage Spikes
Product Description | Specs / Drawings | Ordering Info | PDF
Product Image - HVPZT Piezo Drivers

E-462 HVPZT (1000 V) Piezo Drivers


  • Single Channel Piezo Driver
  • 12 V Battery or P/S Operation
  • Output Voltage Range +10 to +1000 V
Product Description | Specs / Drawings | Ordering Info | PDF
Product Image - Low-Voltage Piezo Piezo Drivers

E-660 LVPZT (100 V) Piezo Drivers


  • Single-Channel Piezo Driver
  • 12 V Battery or P/S Operation
  • Output Voltage Range 5 to 100 V
Back to Top Product Description | Specs / Drawings | Ordering Info | PDF

Modular Controllers

Product Image - Modular Piezo Control Systems (HVPZT & Low-Voltage Piezo)

E-500 Modular Piezo Driver / Controller for Low-Voltage (100 V) and High-Voltage (1000 V) & Systems


  • For High- and Low-Voltage Piezo Systems
  • 19- and 9.5-Inch Chassis
  • Choice of Linear Amplifier Modules
  • Optional Position Servo-Control Modules
  • Optional Display and RS-232 & IEEE 488 Interface Module
Product Description | Specs / Drawings | Ordering Info | PDF
PicoCube® Piezo Controller

E-536 PicoCube® Piezo Controller


  • Extremely Low Noise: Resolution to 25 Picometers
  • For P-363 PicoCube® Systems
  • Peak Power 3 x 100 W
  • Ultra-Low Noise
  • Output Voltage ±250 V
Product Description | Specs / Drawings | Ordering Info | PDF
Sensor & Position Servo-Control Modules for Piezo-Driven Nanopositioning Systems

E-509 Sensor & Position Servo-Control Modules for Piezo-Driven Nanopositioning Systems


  • Position Servo-Control for Piezo-Driven Nanopositioning Systems
  • Improves Linearity
  • Eliminates Drift & Hysteresis
  • For Capacitive Sensors, Strain Gauge Sensors & LVDT Sensors
  • Increases Piezo Stiffness
  • Notch Filter for Improved Dynamics
Product Description | Specs / Drawings | Ordering Info | PDF
Product Image - HVPZT Piezo Driver Module

E-508 High-Voltage Piezo Driver (1000 V) Module


  • Integrated Linear Amplifier, up to 400 W Peak Power
  • Output Voltage Range +3 to +1100 V & Bipolar
  • ±250 V for Shear Actuators
Back to Top Product Description | Specs / Drawings | Ordering Info | PDF
Computer Interface and Display Module for Modular Piezo Controllers

E-516 Computer Interface and Display Module for Modular Piezo Controllers


  • Macro Command Language / Stand-Alone Functionality
  • Low-Noise 20-bit D/A and A/D Converter
  • IEEE 488 (GPIB) and RS-232 Interfaces
  • 6-Digit LCD Display for Voltage and Position
  • 1- and 3-Channel Versions
  • Wave Generator
  • GCS (General Command Set) Compatible
Product Description | Specs / Drawings | Ordering Info | PDF
LVPZT Piezo Driver Module

E-505 LVPZT (100 V) Piezo Driver Module


  • Integrated Linear Piezo Amplifier, 200 W Peak Power
  • Output Voltage Range -20 to +120 V
  • E-505.00S with one fixed voltage of +100 V
Product Description | Specs / Drawings | Ordering Info | PDF
LVPZT Piezo Driver Module, 3 Channels

E-503 LVPZT (100 V) Piezo Driver Module, 3 Channels


  • Integrated Linear Amplifiers, 3 x 14 W Peak Power
  • Output Voltage Range -20 to +120 V
  • E-503.00S with 2 amplifier channels and one fixed voltage of +100 V
Back to Top Product Description | Specs / Drawings | Ordering Info | PDF
Display Modules for Modular Piezo Controllers

E-515 Display Modules for Modular Piezo Controllers


  • 3 1/2-digit LED Display
  • For Voltage & Displacement Data
  • 1- & 3-Channel Versions
Product Description | Specs / Drawings | Ordering Info | PDF

Single Channel Piezo Drivers / Controllers / Cards

Product Image - LVPZT Piezo Driver & Servo-Controller Module with High-Speed RS-232 Interface

     

E-621 LVPZT (100 V) Piezo Amplifier & Servo-Controller Module with
   High-Speed RS-232 Interface


  • Integrated 20-Bit High-Speed RS-232 Interface
  • Integrated Linear Amplifier, 14 W Peak Power
  • Network Capability with up to 12 Channels
  • For Capacitive, LVDT and Strain Gauge Position Sensors
  • GCS (General Command Set) Compatible

Product Description | Specs / Drawings | Ordering Info | PDF
Product Image - LVPZT Piezo Driver & Position Servo-Controller Modules, OEM Version

E-610 LVPZT (100 V) Piezo Driver & Position Servo-Controller Modules, OEM Version


  • Open-Loop and Closed-Loop Versions
  • For Capacitive, Strain Gauge and LVDT Sensors
  • Integrated Linear Amplifier, 14 W Peak Power
  • Runs on Single Stabilized Voltage (12 to 30 VDC)
Back to Top Product Description | Specs / Drawings | Ordering Info | PDF
Product Image - LVPZT Piezo Driver / Servo-Controller with Fast RS-232 Interface

E-665 Piezo Servo-Controller with 24 Bit High-Speed USB Interface


  • Integrated 24-Bit High-Speed USB & RS-232 Interfaces
  • Network Capability with up to 12 Channels
  • Integrated Linear Piezo Driver with 36 W Peak Power
  • SGS, LVDT and Capacitive Sensor Servo-Control
  • Table for User-Defined Curves
  • GCS (General Command Set) Compatible
  • UL and CSA certified
Product Description | Specs / Drawings | Ordering Info | PDF
Product Image - Compact LVPZT Piezo Amplifier & Servo-Controller with High-Speed RS-232 Interface Interface

E-625 Compact Piezo Servo-Controller with 24 Bit High-Speed USB Interface


  • Integrated 24-Bit High-Speed USB & RS-232 Interfaces
  • Integrated Linear Piezo Driver, 14 W Peak Power
  • Network Capability with up to 4 Channels
  • For Capacitive, LVDT and Strain Gauge Position Sensors
  • Wave Table for User-Defined Curves
  • GCS (General Command Set) Compatible
Back to Top Product Description | Specs / Drawings | Ordering Info | PDF
Product Image - High-Speed Digital Piezo NanoAutomation Controller

E-753 High-Speed Digital Piezo NanoAutomation® Controller


  • Next Generation Digital Controller Provides Higher Flexibility, Accuracy and Speed
  • 100 kHz Sensor Sampling; 32-bit Floating Point DSP; 24-bit Low-Noise D/A Converters
  • Ethernet (TCP/IP) Interface for Remote Control Capability, RS-232
  • Automatic Calibration Data Coaching from Stage ID-Chip
  • Additional High-Bandwidth Analog Control Input / Sensor Input
  • Digital I/O Lines for Triggering Tasks
  • Extensive Software Support
  • For Nanopositioning Systems with Capacitive Sensors
Product Description | Specs / Drawings | Ordering Info | PDF
Open-Loop Piezo Drivers

Product Image - LVPZT Piezo Amplifier, 3 Channels

E-663 LVPZT Low Voltage (100 V) Piezo Driver, 3 Channels


  • 3 Independent Channels
  • Integrated Linear Amplifiers, 3 x 14 W Peak Power
  • 3 LED Voltage Displays
  • Output Voltage Range - 20 to 120 V
Product Description | Specs / Drawings | Ordering Info | PDF
Product Image - HVPZT Piezo Amplifier, 3 Channels

E-464 High-Voltage Piezo Driver (1000 V), 3 Channels


  • 3 Independent Channels
  • Integrated Linear Amplifiers, 3 x 25 W Peak Power
  • 3 LED Voltage Displays
  • Output Voltage Range 0 to + 1000 V
Back to Top Product Description | Specs / Drawings | Ordering Info | PDF
Controller for Fast Steering Mirrors

Product Image - E-616 Controller for Multi-Axis Piezo Tip/Tilt Mirrors and Platforms

E-616 Controller for Multi-Axis Piezo Tip/Tilt Mirrors and Platforms


  • Three Integrated Amplifiers Provide up to 10 W Peak Power
  • Closed-Loop and Open-Loop Versions
  • Internal Coordinate Transformation Simplifies Control of Parallel Kinematics Designs (Tripod & Differential Drive)
  • Compact and Cost-Effective Design for OEMs or Bench-Top
Product Description | Specs / Drawings | Ordering Info | PDF
Accessories

Product Image - Power Supply for E-500 Systems

E-530 Power Supply Accessories


  • Included in E-500 Chassis
  • Provides Power for all E-500-Installable Modules
  • 90-264 VAC Operating Range
Product Description | Specs / Drawings | Ordering Info | PDF



 
Hexapods    NanoAutomation   Piezo    Nanopositioning Catalog   Piezo Nano-Positioning and Parallel Kinematics    Ultrasonic Piezo Motors